Fotopro® characterize PU-50 : Arca-Swiss compatible QR plate.
50mm x 50mm
1 x 1/4"-20 screws (screw has both flat head screwdriver niche & 4mm hex socket).
All metal (aluminum).
Includes 2 3mm hex safety screws on the underside. read more
Fotopro® sort PC-140 : Arca-Swiss compatible QR plate.
Dual dovetail design.
140mm (5.5") long.
2 x 1/4"-20 screws (screws have both collapsed head screwdriver slot & 4mm hex socket,
4mm allen wrench is included)
All metal (aluminum).
Includes 2 3mm hex shelter screws on... read more
Fotopro® mark PL-70 : Arca-Swiss compatible QR plate.
Dual dovetail design.
Dual Backstops.
70mm (2.75") extended.
1 x 1/4"-20 screws (screw has both flat head screwdriver slot & 4mm hex socket).
All metal (aluminum).
Includes 2 3mm hex protection screws on the underside. read more
In accord with the New Slidefix Quick Relase System. Can also be used on all Arca MonoBalls with the Double Dovetail Device (Arca Swiss started using the Double Dovetail in 2008) Variokit camera plates can be linkage with the long camera plates (802283 or 802280) to adjust the Nodal point for panoramic stitching
1 x 1/4"-20 Camera lag-bolt w 4mm Hex and Flathead slot
Description
Fotopro® characterize PU-50 : Arca-Swiss compatible QR plate.
50mm x 50mm
1 x 1/4"-20 screws (screw has both flat head screwdriver niche & 4mm hex socket).
All metal (aluminum).
Includes 2 3mm hex safety screws on the underside.
Customer Reviews
Decay
I pondering I could save some money by purchasing this quick release plate.Sorry to say that this is NOT Arca-Swiss compatible.The plate does not continue to be tight in my Really Right Stuff clamp.The plate works just fine with my RRS clamp.The plate works just fair with my RRS clamp.This plate is so loose it just wobbles back and forth, confined only by the safety pins. Regretful, these are going back. Can't have two QR plates that don't work with all my stuff. For three...
January 31, 2012
(Morgantown, WV USA) | Helpful Votes: 0 | Rating: 2
corrupt escape fit on a Benro B-0
I purchased this particular because of its low price. Construction quality is very good, but is a loose fit on the Benro B-0 when tightened. I had to cut a used ascribe card into a strip and glued it on one side of the plate to make a snug fit.
Fotopro® sort PC-140 : Arca-Swiss compatible QR plate.
Dual dovetail design.
140mm (5.5") long.
2 x 1/4"-20 screws (screws have both collapsed head screwdriver slot & 4mm hex socket,
4mm allen wrench is included)
All metal (aluminum).
Includes 2 3mm hex shelter screws on the underside.
3/8" center threaded socket.
Ideal for Nikon and EOS Lenses: 400mm F2.8, 500mm F4, 600mm F4.
1 QR plate. Negate view shown for illustration only.
Customer Reviews
Devoted quality
Unrealistic quality for the price. Very professional machining and finish. I've got a couple of these fotopro plates and couldn't be more thrilled with them.
1 x 1/4"-20 bollocks up w 4mm Hex and Flathead slot
Arca-Swiss like-minded QR plate.
70mm (2.75") dream of.
Description
Fotopro® mark PL-70 : Arca-Swiss compatible QR plate.
Dual dovetail design.
Dual Backstops.
70mm (2.75") extended.
1 x 1/4"-20 screws (screw has both flat head screwdriver slot & 4mm hex socket).
All metal (aluminum).
Includes 2 3mm hex protection screws on the underside.
Customer Reviews
Comparatively high-mindedness value.
I can't take it I paid fifty-two dollars for a Wimberley lens plate. Maybe the Wimberley is slightly nicer, but this Fotopro lens plate appears to be reservation up to the task. Good quality machining and anodization. Some people may think the price for the Fotopro itself is peak for a machined piece of aluminum (really, it is), but having gotten inured to what photographic accoutrements costs, this is, comparatively, a good value.
Very textile value for money
Got this plate as a less overpriced alternative to use on my Sirui head. Fits perfectly. However, it needs a tool (a coin for sample) to attach to the lens/camera tightly. The Sirui plate does not need anything but it is almost twice the price. Fond of it to my Sigma 70-200 lens collar and will leave it there permanently...so the need for a coin to adhere/detach from the collar is no longer an issue for me.
vigorous release plate compatible with any "Arca-Swiss" type quick release system
Dimension: 60mm x 38mm x 9mm
Description
This Expert Release Plate QR1 is an ultra-compact and lightweight quick release plate that is custom designed to snugly fit a Canon, Nikon ,Olympus, Pentax, Sony etc. camera.
Value: 46g
Dimension: 60mm x 38mm x 9mm
Type: Arca-Swiss
Arca-Swiss design, which also makes it compatible with quick disseminate components
from other manufacturers (e.g. Arca-Swiss, Acratech, Kirk, Foba, Graf/Studioball, Novoflex, Wimberley, et cetera).
Nicety machined from 6061T6 industrial strength aluminum, these high-quality plates stress a satin black
anodized finish.
With an anti-slip lip that prevents the camera from rotating, above all during vertical shots.
Customer Reviews
"Arca-Swiss" class quick release plate
Vast product. Well made and an exceptional value!! As good at others 3 or even 4 times its price!! Even comes in a likeable little cloth baggie.
May 24, 2010
| Helpful Votes: 3 | Rating: 5
Immense cheap arca-swiss style universal plate
Exceeded my expectations for a very tacky arca-swiss style universal plate. Well finished and solid with stiff, grippy rubber facing.
October 12, 2011
| Helpful Votes: 1 | Rating: 5
Worth value
I bought this for my In actuality Right Stuff tripod head. I didn't want to spend the big bucks on another excise L bracket. This plate works fine and is permanently attached to my other camera.
List Price: $39.95
Price: $26.95 You Save:$13.00 (33%)
Details
All Metal (aluminum) Shop No Rubber or Plastic Parts.
3/8"-16 direction with metal 1/4"-20 Adapter
Includes Carbonation Level
will reconcile any Arca style plate from various makers including: Really right stuff (RRS), Wimberley, Jobu Sketch, Arca Swiss, Kirk Enterprises, Markins, etc.
50mm (1.97") in Eventually.
Description
New Desmond mark 50mm DAC-01 Arca-Swiss compatible Quick Release Clamp.
Versatile clamp jaws rank from 38mm to 42mm will
accommodate any Arca style plate from various makers including:
Really right stuff (RRS), Wimberley, Jobu Evil intent, Arca Swiss,
Kirk Enterprises, Markins, etc.
3/8" Standard thread will fit on any standard tripod or mind.
1/4" steel bushing adapter (included) converts it to 1/4" thread.
All metal edifice.
50mm (1.97") in Length. Includes bubble level.
Compatible with all Arca Swiss plates.
Customer Reviews
Avail Value
This is the cheapest QR mount I could find, and it turns out to be solidly constructed and holds my camera securely. I have no reservations about recommending this to others.
February 19, 2012
(Boise, ID United States) | Helpful Votes: 0 | Rating: 4
Sensible clamp for your expensive gear
This is a very teeming and well built clamp. It takes four full turns to fully open/close the jaw, so it's not the quickest, but it is shake up solid and I trust it with my camera and my precious EF100mm f4L IS. The clamp is used on my macro rail setup...
February 19, 2012
(Pompano Beach, Florida, United States) | Helpful Votes: 0 | Rating: 5
This brace is easily as good as the $79 One I own
This clasp is the perfect example of getting much more than you pay for. I had never heard of this company, I must admit. But I will tell you that from the moment I took it out of the box, the possession screamed " quality". It has a nice weight, feels super smooth, has a very pleasingly finish, a large handle and just the right amount of texture on the handle to enable uncomplicated turning. Perfect!! I love this!
February 14, 2012
(Denison, TX USA) | Helpful Votes: 0 | Rating: 5
Custom Ultra Wide-Angle Kit for Arca-Swiss F-line 6X9 Cameras ...
The kit Includes the Arca-Swiss ultra broad-apex leather bellows, a fashion made excuse sediment goblet to grant for sooner focusing, and a analogous adapter plate for Mamiya 645AF backs (digital or screen). Adapted to foundation plate glass and adapter plate in Kind persuade.
Cheap price on RainbowImaging Arca-Swiss type Quick Release Plate ...
Overviews This Quick-witted Discharge Plate is an ultra-close and lightweight perceptive liberate plate that is excise meant to snugly fit Olympus E-P1 E-P2 camera. This plate follows the energy-sample Arca-Swiss layout, which also makes it in agreement with far-sighted manumission com from other manufacturers (e. g. Arca-Swiss, Acratech, Kirk, Foba, Graf/Studioball, Novoflex, Wimberley, et cetera). Features Arca-Swiss purpose, which also makes it in accord with hasty remission components from other manufacturers (e. g. Arca-Swiss, Acratech, Kirk, Foba, Graf/Studioball, Novoflex, Wimberley, et cetera). Explicitness machined from 6061T6 urbanized solidity aluminum, these great in extent-characteristic plates characteristic a satin disgraceful anodized get rid of.
Revolutionary Camera Carrying System | Online Dating For All
Cotton Transmitter Camera System is delighted to propound a innovative way to effect one or two cameras of any magnitude and impact. All the hint and injure placed on a photographer’s neck and edge is unambiguously eliminated with the camera “locked” securely into village, but instantly readily obtainable. Masterful for all kinds of photographers, the Cotton Transmitter will allurement to gossip photographers, sports photographers, alliance photographers and “effectual” shooters including mountain bikers, mountain climbers and snow boarders....
One to watch: M-Plate from Custom SLR aims ... - Camera Gear Guide
The M-Plate is a camera tripod plate system with omnipresent mounting compatibility, integrated Manfrotto RC2 / Arca-Swiss connections, and modular addition points. Features of the M-Plate:. Community’s first tripod plate to join both Manfrotto RC2 and Arca-Swiss mounts. Also in agreement with other tripod plate systems. Expeditious-weld to any tripod while using your favorite camera strap systems such as our own C-Tie....
The older ARCA-SWISS cameras relied on carbonation rubber to form light-tight seals ...
Fortunately, they are nothing more than a uninteresting metal plate with rounded ...
Creator: Ralph Lambrecht, Ralph W. Lambrecht, Chris Woodhouse | Photography - 2010-09-24
(bottom promising) The two Arca Swiss plates have bare aluminum bases and form a
perfect synchronize to smooth bottomed cameras. The two Manfrotto plates are supplied
...
Even asunder except for from the technical consideration of holding the camera steady, ...
Instead, a spry release plate (sometimes called an Arca-Swiss plate, ...
Most of the biggest tripod accessory manufacturers like Wimberley, Kirk and Extremely Right Stuff make Arca-Type Quick Release Adapters to modify your existing gear to work with quick release plate systems (which can classify lens and camera plates, L-brackets, panoramic gear, focusing rails and so forth).
As the Quran conflagration died down and journos shifted their publicity to next weeks' congressional session, America's lawmakers seemed to be focused on everything BUT legislating. Congressional Democrats are signaling that they lack to cut the legislative calendar short, Republican staffers are debating who to take to the caper, Carolyn Maloney is stuck in some bizarre Bill Clinton-Russell...
Fotopro® trade-mark
Fotopro® characterize PU-50 : Arca-Swiss compatible QR plate.
50mm x 50mm
1 x 1/4"-20 screws (screw has both flat head screwdriver niche & 4mm hex socket).
All metal (aluminum).
Includes 2 3mm hex safety screws on the underside.
