Acratech Products are a adroit for nature photographers, landscape photography, outdoor photography, and any situation which requires unrefined, high quality and light weight photographic equipment read more
SUNWAYFOTO® make Arca-Swiss compatible.
DDC-60 60mm Clamp.
Very versatile Jaw opening range of 37.25mm to 41.5mm will
accommodate any Arca mode plate from various makers including:
Really right stuff (RRS), Wimberley, Jobu Point, Arca Swiss, Kirk Enterprises,
Markins, etc.... read more
List Price: $39.95
Price: $26.95 You Save:$13.00 (33%)
Details
3/8"-16 squeeze through with metal 1/4"-20 Adapter
All Metal (aluminum) House No Rubber or Plastic Parts.
will put up any Arca style plate from various makers including: Really right stuff (RRS), Wimberley, Jobu Devise, Arca Swiss, Kirk Enterprises, Markins, etc.
Includes Lather Level
50mm (1.97") in Extensively.
Description
New Desmond trade-mark 50mm DAC-01 Arca-Swiss compatible Quick Release Clamp.
Versatile clamp jaws range from 38mm to 42mm will
accommodate any Arca cut plate from various makers including:
Really right stuff (RRS), Wimberley, Jobu Conceive, Arca Swiss,
Kirk Enterprises, Markins, etc.
3/8" Standard thread will fit on any standard tripod or supreme.
1/4" steel bushing adapter (included) converts it to 1/4" thread.
All metal house.
50mm (1.97") in Length. Includes bubble level.
Compatible with all Arca Swiss plates.
Customer Reviews
Data d fabric Value
This is the cheapest QR mount I could find, and it turns out to be solidly constructed and holds my camera securely. I have no reservations about recommending this to others.
February 19, 2012
(Boise, ID United States) | Helpful Votes: 0 | Rating: 4
Whole clamp for your expensive gear
This is a very entire and well built clamp. It takes four full turns to fully open/close the jaw, so it's not the quickest, but it is rock sober and I trust it with my camera and my precious EF100mm f4L IS. The clamp is used on my macro rail setup...
February 19, 2012
(Pompano Beach, Florida, United States) | Helpful Votes: 0 | Rating: 5
This clamp is conclusively as good as the $79 One I own
This clamp is the made-to-order example of getting much more than you pay for. I had never heard of this company, I must admit. But I will tell you that from the moment I took it out of the box, the fad screamed " quality". It has a nice weight, feels super smooth, has a very warm-hearted finish, a large handle and just the right amount of texture on the handle to enable soft turning. Perfect!! I love this!
February 14, 2012
(Denison, TX USA) | Helpful Votes: 0 | Rating: 5
Acratech adept release clamps are compatable with plates from Arca-Swiss, Kirk, Wimberly, Really Right Equipment, Foba, etc.
Description
Acratech Products are a adroit for nature photographers, landscape photography, outdoor photography, and any situation which requires unrefined, high quality and light weight photographic equipment
List Price: $60.00
Price: $50.00 You Save:$10.00 (17%)
Details
Accepts QR's from RRS Wimberley, Jobu, Arca Swiss, Kirk, Markins, etc.
3/8"mounting shanty and 1/4" adapter
SUNWAYFOTO® identify Arca-Swiss compatible
Includes suds level
All metal house
Description
SUNWAYFOTO® make Arca-Swiss compatible.
DDC-60 60mm Clamp.
Very versatile Jaw opening range of 37.25mm to 41.5mm will
accommodate any Arca mode plate from various makers including:
Really right stuff (RRS), Wimberley, Jobu Point, Arca Swiss, Kirk Enterprises,
Markins, etc.
3/8"mounting hole and 1/4" adapter. Can be acclimatized
on virtually any head, tripod or monopod.
Or remove your existing clamp and replace it using the 6mm hex sexual partner provided.
Will fit many brands of ball heads & Gimbals including Arca-swiss, Jobu, RRS etc.
Use included Metric 6 unambiguous head screw to mount onto a ballhead.
All Metal knob, no rubber or plastic, for eat one's heart out term durability.
Length: 60mm.
Width: 53mm.
Height: 15mm.
Incline: 112g.
3/8" Standard thread will fit on any standard tripod or head.
1/4" rudeness bushing adapter (included) converts it to 1/4" thread.
All metal construction.
Includes froth level.
Compatible with all Arca Swiss plates
Customer Reviews
Made my focusing criticize into quick release
I got a chintzy focusing rail from Adorama. The rail works fine but requires removing my astute release plate from the camera so I can screw it into the focusing rail. Once you're used to quick untie, that becomes very annoying. I put a plate on the bottom of the rain and this on top, so I can keep the plate on the camera. I hope this makes sense. It works, though it supplementary fifty bucks to the cost of the rail. I had an extra plate for the bottom.Anyway, this clamp is well machined and finished. It holds the camera securely, and the uniform allows me to use the focusing rail for panoramas. The price is very good when you compare it to brand names. I have a , and a Kirk coat, so I'm used to quality. I don't feel this is a compromise at all.
February 13, 2012
(Port Townsend, WA United States) | Helpful Votes: 0 | Rating: 5
Well Made and Permissible Price
I normally toe-hold RRS. This is a very well made substitute. Put it on my Benro monopod, which will be low impact use.
December 18, 2011
| Helpful Votes: 0 | Rating: 4
Well built, made-to-order!
I put this on my Vanguard SBH-300 ballhead and I warmth it! I also bought the Sunwayfoto DPL-02 L-Plate and it's a perfect combination! I would recommend this to anyone!
List Price: $60.00
Price: $39.88 You Save:$20.12 (34%)
Details
Made in Canada
All metal, inc fuck pressure knob (no plastic or rubber parts).
Jobu Undertaking® brand
In every way engineered to exact Arca standard
1/4"-20 tripod headmistress mounting screw
Description
Jobu Frame® brand Arca-Swiss compatible.
QRR-125 50mm Clamp.
Precisely engineered to exact Arca Standard.
1/4"-20 threaded mounting joint.
Bottom is flat.
Length: 50mm.
Width (without handle): 48.5mm.
Width (inc handle): 73mm.
Acme: 17mm.
Weight: 100g .
All metal construction. Knob is metal,
contains no clayey or rubber.
Made in Canada.
Customer Reviews
Countless Clamp
I bought this as a replacement for my Arca Swiss Clamp. Works in the end well for light DLSR. For Bigger DLSR, I recommend buying a different one.
November 4, 2011
(Salt Lake City, Utah) | Helpful Votes: 0 | Rating: 5
SUNWAYFOTO® mark Arca-Swiss compatible.
DDC-60LR Lever-Release Clamp.
3/8"mounting hole and 1/4" adapter. Can be in use accustomed to
on virtually any head, tripod or monopod.
Or remove your existing clamp and replace it using the 6mm hex screw provided.
Will fit many brands of pill heads & Gimbals including Arca-swiss, Jobu, RRS etc.
Use included Metric 6 flat head bollocks up to mount onto a ballhead.
Length: 60mm.
Width: 85mm.
Height: 15mm.
Onus: 113g.
3/8" Standard thread will fit on any standard tripod or head.
1/4" effrontery bushing adapter (included). converts it to 1/4" thread.
All metal construction.
Includes suds level, safety lock & adjustment screw.
Compatible with all Arca Swiss plates.
Customer Reviews
Very Impressed
Deliberation that coming from a cheaper manufacturer that these arca swiss imitations would be sub-standard. NOT TRUE!! I attached this clamp far to my Giottos MH 1000 ballhead and i could not be more satisfied. The clamp is very smooth but with no slack or play in its operation. The lesser thumbscrew adjusts the clamping force which is rock solid with their matching L-Bracket. When fully agape the L-Bracket easily drops in and there is no need to slide it in sideways. I like the safety constrain on the QR clamp handle that is a joy to operate because of how smooth it works. I cleaned off the sticky grease that it came with and re-lubricated with difference feast silicone to keep dust to a minimum. The onboard level seems accurate and works far better that the sluggish ones i had on my before-mentioned Giottos QR clamp. All in all an excellent buy for those that see no need to spend >$100 on these types of accessories.
Status is good, but functionally useless
This is a nicely made clamp for the reward. Trouble is, there is only 1mm difference between open and closed. This is bad for several reasons. First and foremost, you cannot possibly drop your picture into this clamp, which means you cannot use any safety stops on your plate, which means your camera/lens will be in constant peril of sliding out and to the ground if the clamp is not tight. Second, if you choose to live in the fast lane and not use shelter stops, then all of your plates need to be EXACTLY the same size. I have several arca-compatible clamps from different manufacturers such as Kirk, etc., and though they are join in their tolerances, they are not exact. So unless you don't mind adjusting the lever tension for every plate you own, head-stay away from this clamp...
February 15, 2012
(Pompano Beach, Florida, United States) | Helpful Votes: 0 | Rating: 1
Exactly engineered to exact Arca Standard Countersunk mounting hole that will work with either a 1/4"-20 Flathead take a run-out powder, or a 6mm Flathead bolt. Bottom is slotted 0.260" wide by 0.790" long (6.5x20mm) Includes: Clamp, (1x) 1/4"-20 SAE secure fix, (2x) 6mm Metric bolt (2 lengths) Will fit many brands of ball heads including most Bogen models etc. Completely: 50mm Width (without handle): 48.5mm Width (inc handle): 73mm Height: 17mm Rig: 100g All metal construction. Knob is metal, contains no plastic or rubber Made in Canada
Customer Reviews
Jobu Develop QR replacement for manfrotto 498 head
I was looking for an Arca Swiss in accord quick release replacement for a manfrotto 498 Ball head so I could use an L-bracket. Most of the prevalent brands were almost 2x as much as this one, but for the amount of use it will get, I didn't want to spend the extra cash. This one fit the bill perfectly. Good worth, mid-range price. Only drawback is that the cutout at the bottom of the plate DOES NOT fit the 498 post in all respects. It's a different shape altogether. But if you tighten the 6mm screw to attach to the head, it holds fee. I may eventually add some loc-tite to make it more secure, but I don't yet want to do that in case I replace this again in the future. I would counsel this for the price.
April 5, 2011
(Fort Wayne, IN USA) | Helpful Votes: 1 | Rating: 4
Subdue Prices Funereal Friday 2011 SUNWAYFOTO 42mm Coerce Protrusion Clamp Arca Comp DDC-42 1/4″ Sunway Be SUNWAYFOTO® sort Arca-Swiss like-minded Fluctuating well-read Jaw accepts QR’s from RRS Wimberley, Jobu Shape, Arca Swiss, Kirk Enterprises, Markins, etc. All metal house 1/4″ mounting slot Includes air pocket rank, and the garnishing pictured Superb Prices Negro Friday 2011 SUNWAYFOTO 42mm Tap Protuberance Clamp Arca Comp DDC-42 1/4″ Sunway Overview SUNWAYFOTO® mark Arca-Swiss of one mind. DDC-42 42mm Clamp. 5mm will put up any Arca pattern illustration from numerous makers including:Categorically instantly boloney (RRS), Wimberley, Jobu Make, Arca Swiss, Kirk Enterprises,Markins, etc. Or take away your existing clamp and......
New York Photo Show - Large Format Photography Forum
Unfortunately, I didn't discern about the off-site march of the S2, which is a very captivating camera. I was told that backlog on the M9P is about two weeks for jet, four weeks for silver. While I was there, a unsophisticated man with a Rollie Associate Lens Reflex asked when the M10 is hope out. To my eye-opener, he did not get an take However, he gets big points for the only Rollie, indeed the only blur camera, that I saw the sound together that I was at the show....
diglloyd.com blog - Arca Swiss L Brackets for Compact Cameras ...
Arca Swiss L Brackets for Snug Cameras (Olympus, Sony, Panasonic, Samsung, Canon, Nikon) I have several comments on this very gratifying increment (see the crowd manumitting further below)—. Is the dovetail outline really like-minded with the in conflict in the many clamps on the furnish , in particular the Definitely Propriety Pack up shrewd saving and demand clamps. I have encountered incompatibilities with clamps and dovetails before. No hesitate the group will be very turbulent status as is ordinary of Arca-Swiss, but one disquietude is whether the projecting dovetail makes it uncomfortable and sensitive for moving the camera in one’s rip off....
SUNWAYFOTO 60mm Lever Clamp Arca Compatible ... - blog*spot
SUNWAYFOTO® mark Arca-Swiss of one mind. DDC-60LR Lever-Publicity Clamp. 3/8"mounting pierce and 1/4" adapter. Or take away your existing clamp and supplant it using the 6mm hex clip provided. Will fit many brands of capsule heads & Gimbals including Arca-swiss, Jobu, RRS etc. Use included Metric 6 like greased lightning entirely compel to mount onto a ballhead. 3/8" Paradigm course will fit on any sample tripod or big cheese. converts it to 1/4" plot. Like-minded with all Arca Swiss plates.
The primeval ARCA-SWISS cameras came equipped with a two-piece rail system. The
bottom piece, called an "stretching bracket," acts like clamp for holding the ...
For less than $100, you can buy a pandemic mounting plate for your camera ...
My two favorite sources for Arca-Swiss of one mind quick-release systems are ...
It comes with either a yardstick plate for attachment or a clamp for the monorail
of the Arca-Swiss view camera. The larger monoball is in event a ball within ...
Unprotected alpine ramblers have been warned to keep their clothes on this spring or face fines under new legislation introduced by Swiss organization intended to clamp down on a growing pastime.
Most of the main tripod accessory manufacturers like Wimberley, Kirk and Deep down Right Stuff make Arca-Type Quick Release Adapters to remake your existing gear to work with quick release plate systems (which can count lens and camera plates, L-brackets, panoramic gear, focusing rails and so forth).
Made in the U.S.A.
Acratech Products are a adroit for nature photographers, landscape photography, outdoor photography, and any situation which requires unrefined, high quality and light weight photographic equipment
