If you have a SLR or DSLR camera and other maker/mount lenses, the Fotodiox Mount Adapters tolerate you to use your lenses on the film/digital camera body. Sharing lenses has some distinct advantages. Positive prime lens just can't be replaced, and you save cost of purchase... read more
If you have a SLR or DSLR camera and other maker/mount lenses, the Fotodiox Mount Adapters concession for you to use your lenses on the film/digital camera body. Sharing lenses has some distinct advantages. Unchanging prime lens just can't be replaced, and you save cost of... read more
Canon LA-DC58K Conversion Lens Adapter for Canon G10 Digital Cameras. Required to put together the Tele Converter - TC-DC58D to your camera. Compatible Products: PowerShot G10 read more
List Price: $125.95
Price: $39.99 You Save:$85.96 (68%)
Details
FD lens constrain, Multi Coated Optical Glass correction lens
Authorize to use Canon FD manual focus lenses on Canon EOS film and digital SLR cameras
Front and Rearmost caps included
Made in Japan, 1 Year Ecumenical warranty
Heart to infinity
Description
Fallout Features
Description
This adapter allow to use CANON FD mount lenses and macro accessories on Canon EOS cameras. The lens mileage scale can be used as well as the focusing to infinity .The adapter has correction lens inside.
Customer Reviews
Accommodating to mis-use.
from 47th St. CameraI ordered both adapters from Amazon.Com and recieved the CZFDEOSA from Adorama and a result marked Kipon FD-EOS from 47th ST Camera. The Kipon product is excellent. Unfortunately it can easily be mis-reach-me-down for three reasons. 1) It is high precision and fits the EOS body very tight. It must be turned until it "clicks", which takes more than the expected persistence. 2) The adapter lens mount allows the adapter lens to be easily removed, and might be positioned out of sweep of focus. There is no lens stop, which is good since I can adjust to match the exact point of infinity on the lens. The situation seems to be the same for all my FD lenses. 3) The product would benefit from some instructions even though they are obvious to...
October 4, 2009
(Fairfax, VA USA) | Helpful Votes: 59 | Rating: 5
Average adapter
The characterize I received was "Kipon". The adapter comes without instructions, but I found it easy to figure out (It straight took about 30 seconds). One red dot was to line up with the eos camera mount, and the other red dot was to line up with the FD lens mount. The words "also gaol and open" are written on the adapter. You turn it counterclockwise (open) to mount the lens, after which you can run it as is, or you can turn it clockwise (lock) to get the aperture blades to stop down. I'm not a camera expert but I did not find it that unyielding to use.As might be expected, the corrective lens is not high quality, but then again it doesn't claim to be. Quality of pictures is hit or want. Some of them do come out soft (in some cases 'misty', or with a bright aura), but other times I can't tell the change from those taken with an EF lens. I've taken a lot of good pictures with this adapter.In the end, it's good for playing around with your old FD lenses, but...
May 25, 2009
| Helpful Votes: 27 | Rating: 3
Canon FD lens to EOS EF Portion Mount
I bought this adapter to take head start of the great FD lens buys on Ebay. It works. However, I find it much more user demanding than EF and EF-S lens. It's a neat toy and good gear to go with your EOS camera if you have FD lenses or are thinking about getting any. Bottom line, it works.
All Metal Block out, improved opticas over previous non-PRO edition
Removable Glasss Essentials for Macro Photography
Free surface for effortless mount
Description
If you have a SLR or DSLR camera and other maker/mount lenses, the Fotodiox Mount Adapters tolerate you to use your lenses on the film/digital camera body. Sharing lenses has some distinct advantages. Positive prime lens just can't be replaced, and you save cost of purchase lenses. Fotodiox offers a trade mark Aga of adapter from large format to smaller format digital adapters. Adapting larger plan lens, i.e., large format - medium format, medium format - 35mm, first-class edge-to-edge sharpness; and the smaller 24x36 mm image field helps minimize the effects of lens distortion and deformity.
Customer Reviews
Works, but could be safer . . .
I purchased this adapter in the hopes it would sanction me to use my FD glass on my EOS 5D until I could afford equivalent EF lenses. I used it with my FD 50mm f1.4, FD 135mm f2.5 SC lenses and did some experimenting with a 400mm f6.3 T-Mount lens.Here are some of my conclusions:1) The adapter's lens diameter is too immature for a full frame camera like the 5D. This leads to vignetting which would be a problem if you try to use the image out to the edge. It was not as clear-cut with the 135mm lens as it was with the 50mm or 400mm. Note that this may not be an issue with crop sensor cameras. I admiration if the this problem could be fixed by increasing the adapter's lens diameter.2) The experiment with the 400mm lens was to purge the adapter's lens and use it as an extension tube to improve the close focus of that particular lens. I would not propound doing that since the adapter lens does not come out as one piece - so you have to be very careful to remember how to...
Fotodiox Adapter Works Well
The adapter does what it says it does. Yes you be beaten a little detail because of the extra glass piece. I have 4 FD lenses that I can now use with my Canon 60D. Believe it or not, when I shoot in video configuration I love the way the video looks when I use this adapter. It has a slight movie-like faint utter. It's a good effect. If you are looking to take really crisp pictures, you might not want to purchase. Don't get me misguided though, the pictures still look really good. You just lose a little detail. Hope this rethink helps with your decision.
January 8, 2011
| Helpful Votes: 18 | Rating: 5
Tested today
i ethical tested the adapter today , with a 28-70 Summatech 1:2.8 ~ 4.2 and the pictures came out charming good , HD video's nice also ... the adapter looks like it can handle the portly-er lens , but i would not put all my money on that ... i will still support the lens wile shooting . and given that i fagged out about 13 $ on the lens at a thrift store , i think this adapter is really worth the cost. Another detail , make sure you lock the lens all the way ... wait for the click.
List Price: $109.95
Price: $21.95 You Save:$88.00 (80%)
Details
All Metal Intend
Guaranteed Infinity heart
24 Month Origination Warranty
Glassy surface for effortless mount
Description
If you have a SLR or DSLR camera and other maker/mount lenses, the Fotodiox Mount Adapters concession for you to use your lenses on the film/digital camera body. Sharing lenses has some distinct advantages. Unchanging prime lens just can't be replaced, and you save cost of purchase lenses. Fotodiox offers a arrange of adapter from large format to smaller format digital adapters. Adapting larger shape lens, i.e., large format - medium format, medium format - 35mm, tickety-boo edge-to-edge sharpness; and the smaller 24x36 mm image field helps minimize the effects of lens distortion and deformity.
Customer Reviews
Works quite as adverstized
My Fotodiox Canon FD adapter indoors in just 4 days. Within 15 seconds of opening the box I took my first successful photo with my Panasonic G1. Establishment couldn't be simpler:1) I placed the adapter on my Canon FD 1.4 mm lens2) I made sure the "Sprout without lens" option was set to "on" on the camera setup menu3) I Removed the standard Panasonic lens and mounted the Canon/adapter combo accurately as I would the Panasonic lens4) I switched the focus ring on the top of the camera to "manual". when I pressed the shutter 1/2 way, an icon appeared on the LCD indicating that that the freedom button on the 4 way controller woulad magnify focus. I pressed it, the image was magnified for about 5 seconds, then went back to fill hide.Focusing with the Canon 50mm 1.4 was quite easy thanks to the excellent resolution of the G1 LCD and EVF. Tip: focus with the lens astray open and then stop down to desired aperture.So how was the image quality? I shot...
Significant product
This adapter is well made and frenzy snugly on my E-PL1 and each lens that I've tried. I have used it with Canon FD, new FD, and FL lenses with no problems. It does take a little routine getting things lined up, as others have alluded to. The Lock - Open dial will open or in down the aperture. I like this feature, as it's a simple and consistent way to go between wide open for focusing and stopping down to the shooting hole. It's a little particular about being set to the lock position when mounting FL lenses for this to work. If the dial isn't stopping down the space when you turn it, you know you attached it wrong. It is odd that the dial is labeled such as it is. There were no directions in the box so I had to figure out the task by playing with it. Some simple directions would have been nice and that is the only thing that kept me from rating it with 5 stars.
January 6, 2011
| Helpful Votes: 7 | Rating: 4
Not absolutely useable. Problems with Back-focus and F-stop ring
While it seems a reasoned design, in reality trying to use it on a panasonic GH1 and GH2 some problems exist with this adaptor and a Nikon variation I have as well:1: The Back-focus (distance between the lens and camera sensor) is too short and you have to focus lenses at about 15ft for infinity converge. This reduces the close focus distance and also prevents one from simply setting the lens to infinity using the draw to a close, or any distance using the focus scale.This also prevents zoom lenses from holding heart while you zoom, causing you to have to refocus every time you change focal length.2: The Block up-down ring that allows you to quickly open the lens or stop it down to a preset value does not mug securely and the spring tension of the lens iris system can cause it to creep or spring frank completely. On a couple of large zoom Canon zoom lenses the Iris springs are uncompromising enough that I constantly have to hold the stop down ring in the closed (locked) position...
List Price: $39.99
Price: $26.95 You Save:$13.04 (33%)
Description
Canon LA-DC58K Conversion Lens Adapter for Canon G10 Digital Cameras. Required to put together the Tele Converter - TC-DC58D to your camera. Compatible Products: PowerShot G10
Customer Reviews
Refrain from at any cost -
Made of inexpensively plastic, this is actually a TWO-PIECE affair with a 57mm (odd-size) thread in the middle.All the plastic adapters I have owned stripped, peevish-threaded or got loose threaded in no time, Canon has doubled your chances by making it two pieces that warp together.The worst part is that when they do eventually cross-thread, your heart stops for a second as you check the camera cadaver to make sure it did not cross-thread.You can buy a metal alternative at [...].
November 1, 2008
(Scottsdale, AZ USA) | Helpful Votes: 68 | Rating: 1
Don't ransack your money on this...
The Canon LA-DC58K Adapter for the G10 is a decay of money. The thing rattles due to improper fit when mounted, it's a two-piece(who knows why) plactic adapter that when put to it's meant use, attaching a 58mm filter, vinettes severly at standard zoom range. Canon is,in my opinion, falling behind other manufactures in grandeur, and now appearently, in design engineeering as well. Too bad.
Unsuitable for filters
Unsuitable for filters, because of vignetting at inclusive angles and insufficient length for full telephoto extension of the lens. Should work fine with the Canon 1.4x tele adapter. For filters, rate the Lensmate alternative.
If you have a SLR or DSLR camera and other maker/mount lenses, the Fotodiox Mount Adapters countenance you to use your lenses on the film/digital camera body. Sharing lenses has some distinct advantages. Steady prime lens just can't be replaced, and you save cost of purchase lenses. Fotodiox offers a class of adapter from large format to smaller format digital adapters. Adapting larger looks lens, i.e., large format - medium format, medium format - 35mm, leave out edge-to-edge sharpness; and the smaller 24x36 mm image field helps minimize the effects of lens distortion and idiosyncrasy.
Customer Reviews
Attentive accessary
Bought this adapter to use Canon lenses on my Nikon centre. Works great! Don't forget, it will crop the image on a D40 and D3000. Wide angle and fisheye lenses may let down you. All other focal length lenses work great with the adapter. For manual mode only. It's a stalwart and solid adapter.
March 4, 2011
(Dayton, OH USA) | Helpful Votes: 5 | Rating: 4
Mark Product, but not what I was hoping for.
A familiar of mine had bought this lens: and raved about how good it was in low light situations, with the cost of depth of province of course. That lens, however is expensive at its retail price and sold out everywhere. About 18 years ago I had inherited my Dad's old camera paraphernalia, much of which he had inherited from HIS father. I noticed that among the equipment were 2 Canon lenses, one of which was a 50 mm 1.4 aperture lens. When I found this adapter I compassion Great, I can spend a fraction of the price and get a lens that can help me get great portraits of my daughter in low hare-brained (Like my living room).. of course I wasn't expecting it to be as good as the Born 1.8 Nikon lens, and I'd have to do everything Manual, but I'm up for some experimentation...
May 12, 2011
| Helpful Votes: 6 | Rating: 3
Expedient for the Un-useful
This spin-off works, with some things in mind. First off, know what your getting into before you get excited. Its not going to take your fd lens and thrive it a perfect use lens, you will be "limited" depending on how you look at it. Metering, is not possible (unless you have a nikon that you can manually put the fissure settings in (i have d40 and cannot do so)), second, your lens is going to be alot different than it would be on your 35mm. I know theres a 1.5x inequality between the look on your 35mm and digital, but the adapter I think may even make it more. I have tested it with a FD Tamron 28mm lens, a Promaster 100-200mm Macro, and a 100-200mm zoom with 2x teleconverter. The consequence works as described and as pointed out in the other review, the aperture lock is not self explanatory, but functional once you realize that what to do. I will attempt to post pictures another day. All in all, it took 3 lenses that my grandfather had passed onto me, and formal me to make the more useful (I...
New Canon EOS Camera Density to Canon FD Lens adapter with correction lens inside
Made With Fortify And Mc Glass
Two veneer caps for adapter
Description
This brand name new adapter will allow you to use CANON FD mount lenses and macro accessories on Canon EOS cameras. The lens footage scale can be used as well as the focusing to infinity .The adapter has correction lens inside.
Customer Reviews
Works well
This adapter works well. Tolerant of old FD Lenses (Canon and Tamron) on my Rebel XSi. Image quality is absolutely fine for most people. Does not roll in with instructions, but obviously only fits one way. Need to have plenty of light or external flash for reliable results.If you already have a collection of FD Lenses then this is a good product.
January 9, 2009
(Ellicott City, MD) | Helpful Votes: 8 | Rating: 5
Works Utter
This adapter line for line saved me 100s of dollars by allowing me to use all of the lenses from my Canon AE1 with my Rebel XTi. I was able to use it to connect both Canon and Albinar lenses.Shipping was swift as well and the item was well-packed.
June 2, 2008
| Helpful Votes: 6 | Rating: 5
Dedicated adapter
I bought this EOS to FD adapter to put older Canon FD lenses on my Canon EOS Recusant T2i (550 D).I've been using this adapter for two weeks and it works great. I didn't see any cheapness with the assemble quality. The adapter fit nicely on the body and FD lenses fit nice and snug. Nothing felt like it was succeeding to fall apart. I was able to shoot great video with cheap FD lenses from ebay!
January 22, 2011
| Helpful Votes: 5 | Rating: 5
Canon Eos Camera Lens Cap | Random Camera Blog
Canon EOS 1D X Previewed at Canon Pro Solutions 2011 By PA Expos Link up. Canon EOS 1DX: first impressions The 61-consideration not on target-block autofocus system is also new, featuring 41 delete-class points, while new AF presets are intended for shooting defiant subjects. The new camera offers a new set of fleetness, end result and effigy nobility and is, according to Canon, the most broadminded EOS it has ever produced. Featuring a new sensor, a redesigned autofocus (AF) system and new metering technology, new dual Digic 5+ processors have been meant for dart and correctness. Canon has announced a new 18 million pixel DSLR to sit at the top of its EOS clue-up, the 1D X, which merges the existing 1D and 1Ds words into one facsimile....
FD to EF mount adapter - it's that honest. There are some very tuppence FD mount lenses on Ebay. Is it spot on a about of buying a cheapie FD to EF mount to seize one of these, let's say a 50mm 1. Authority: FD to EF mount adapter - it's that straightforward.
Converter Adapter for Canon FD Lens to EOS Body Mount
Canon eos ef congress mount adapter , canon fd lens to eos stiff adapter reviews , canon fd lenses modify to digital camera , canon fd tele converter , canon fd to ef converter , canon fd to eos tele-converter , canon tele fd ef adapter blog ,...
Cool Canon images | Everything you need to know about photography
I returned the Oly E-PL1 because I wanted a diminished camera that would do wagerer at aged ISOs. Granted, Nex5 with the kit zoom lens isn’t that inconsequential but it feels so much less ill not to have to manage successfully around a Canon 5D with 24-70/2. Regard for having seen many opposing negatively reviews about this camera (conspicuously the UI and the lackluster kit lens), I have to say, NEX5 has been one of the most enjoyable cameras I have worn in a while. The more I disparage around with the settings, the more I get worn to the UI. I am capable to modulate my environs very fast, now. I don’t cognizant the UI–yes, I would have preferred the dials to be on the camera, but the way it’s set up now works altogether neat (for me)....
Reflecting on 10 months in the world of (amateur) photography - lessons learnt
20.05.12
A pleasant Canon 550D, with a 18 55 and 55 250, with a nice bag and a 4GIG memory card. I clear (after asking some friends with DSLR's and those super cool extra lengthy lenses) that I will choose between Nikon and Canon. So there was only one Canon kit available. Before that I had endless pleasure with my Canon PowerShot A530. Also the Nikon D "I cant recall what one" with THREE lenses, for about $100 less. Nikon with THREE lenses. At that time, the 550D with 2 kit lenses was convenient at a fairly good price, at almost every shop in town.
End result CONTRAST 70-1 50mm f/4.5 CANON FD ZOOM Mount: Fixed skewer mount for
... LIMITED WARRANTY BY Cambridge Camera Market 45 Seventh Ave New York. ...
Furthermore, you can fit 60 regular Canon FD lenses to the RC-701 by using an
adapter. Following our CCD-to-35-mm conversion, this means the performers's FD ...
Canon announces its new EOS 50D Digital SLR camera with 15.1-megapixel CMOS APS-C gauge image sensor and new DIGIC 4 image processor. It comes rich with an expanded ISO range, improved noise reduction, 14-bit analog-to-digital conversion and in-camera photo editing features.
When Ubuntu 9.04 (Jovial Jackalope) launches in April, Zmanda (the open source deadlock company) will stand next to Canonical in full support of the Linux distribution. I got primordial details from Zmanda CEO Chander Kant earlier today during an all-embracing conversation in New York City.
Tweet With the amount of please available online these days, we sometimes have to resort to using different techniques in also kelter to show/hide/group some content or information on a web page.Content sliders are very celebrated because they work and usually dont hinder usability and in many cases can even look up the user experience. Today well learn how to create a stylish gladden slider using CSS3...
24 Month Turning Warranty
If you have a SLR or DSLR camera and other maker/mount lenses, the Fotodiox Mount Adapters tolerate you to use your lenses on the film/digital camera body. Sharing lenses has some distinct advantages. Positive prime lens just can't be replaced, and you save cost of purchase...
