If you have a SLR or DSLR camera and other maker/mount lenses, the Fotodiox Mount Adapters brook you to use your lenses on the film/digital camera body. Sharing lenses has some distinct advantages. Particular prime lens just can't be replaced, and you save cost of purchase... read more
This manufacturer new adapter will allow you to use CANON FD mount lenses and macro accessories on Canon EOS cameras. The lens detachment scale can be used as well as the focusing to infinity .The adapter has correction lens inside. read more
List Price: $125.95
Price: $39.99 You Save:$85.96 (68%)
Details
Woolly to infinity
Front and Educate caps included
FD lens coop up fix on, Multi Coated Optical Glass correction lens
Assign to use Canon FD manual focus lenses on Canon EOS film and digital SLR cameras
Made in Japan, 1 Year Worldwide warranty
Description
Commodity Features
Description
This adapter allow to use CANON FD mount lenses and macro accessories on Canon EOS cameras. The lens distance scale can be employed as well as the focusing to infinity .The adapter has correction lens inside.
Customer Reviews
Leisurely to mis-use.
from 47th St. CameraI ordered both adapters from Amazon.Com and recieved the CZFDEOSA from Adorama and a by-product marked Kipon FD-EOS from 47th ST Camera. The Kipon product is excellent. Unfortunately it can easily be mis-occupied for three reasons. 1) It is high precision and fits the EOS body very tight. It must be turned until it "clicks", which takes more than the expected vigour. 2) The adapter lens mount allows the adapter lens to be easily removed, and might be positioned out of string of focus. There is no lens stop, which is good since I can adjust to match the exact point of infinity on the lens. The viewpoint seems to be the same for all my FD lenses. 3) The product would benefit from some instructions even though they are obvious to...
October 4, 2009
(Fairfax, VA USA) | Helpful Votes: 59 | Rating: 5
Sufficient adapter
The sort I received was "Kipon". The adapter comes without instructions, but I found it easy to figure out (It rightful took about 30 seconds). One red dot was to line up with the eos camera mount, and the other red dot was to line up with the FD lens mount. The words "hook and open" are written on the adapter. You turn it counterclockwise (open) to mount the lens, after which you can discontinue it as is, or you can turn it clockwise (lock) to get the aperture blades to stop down. I'm not a camera expert but I did not find it that enigmatical to use.As might be expected, the corrective lens is not high quality, but then again it doesn't claim to be. Quality of pictures is hit or mistake. Some of them do come out soft (in some cases 'misty', or with a bright aura), but other times I can't tell the dissimilarity from those taken with an EF lens. I've taken a lot of good pictures with this adapter.In the end, it's good for playing around with your old FD lenses, but...
May 25, 2009
| Helpful Votes: 27 | Rating: 3
Canon FD lens to EOS EF Confederation Mount
I bought this adapter to take gain of the great FD lens buys on Ebay. It works. However, I find it much more user demanding than EF and EF-S lens. It's a discriminating toy and good gear to go with your EOS camera if you have FD lenses or are thinking about getting any. Bottom line, it works.
All Metal Format, improved opticas over previous non-PRO edition
Clean-shaven surface for effortless mount
Description
If you have a SLR or DSLR camera and other maker/mount lenses, the Fotodiox Mount Adapters brook you to use your lenses on the film/digital camera body. Sharing lenses has some distinct advantages. Particular prime lens just can't be replaced, and you save cost of purchase lenses. Fotodiox offers a scale of adapter from large format to smaller format digital adapters. Adapting larger set-up lens, i.e., large format - medium format, medium format - 35mm, not counting edge-to-edge sharpness; and the smaller 24x36 mm image field helps minimize the effects of lens distortion and deviation.
Customer Reviews
Works, but could be advantage . . .
I purchased this adapter in the hopes it would aside me to use my FD glass on my EOS 5D until I could afford equivalent EF lenses. I used it with my FD 50mm f1.4, FD 135mm f2.5 SC lenses and did some experimenting with a 400mm f6.3 T-Mount lens.Here are some of my conclusions:1) The adapter's lens diameter is too tiny for a full frame camera like the 5D. This leads to vignetting which would be a problem if you try to use the image out to the edge. It was not as especial with the 135mm lens as it was with the 50mm or 400mm. Note that this may not be an issue with crop sensor cameras. I reason if the this problem could be fixed by increasing the adapter's lens diameter.2) The experiment with the 400mm lens was to interval the adapter's lens and use it as an extension tube to improve the close focus of that particular lens. I would not plug doing that since the adapter lens does not come out as one piece - so you have to be very careful to remember how to...
Fotodiox Adapter Works Well
The adapter does what it says it does. Yes you consume a little detail because of the extra glass piece. I have 4 FD lenses that I can now use with my Canon 60D. Believe it or not, when I shoot in video procedure I love the way the video looks when I use this adapter. It has a slight movie-like faint obscure. It's a good effect. If you are looking to take really crisp pictures, you might not want to purchase. Don't get me unjust though, the pictures still look really good. You just lose a little detail. Hope this examination helps with your decision.
January 8, 2011
| Helpful Votes: 18 | Rating: 5
Tested today
i reasonable tested the adapter today , with a 28-70 Summatech 1:2.8 ~ 4.2 and the pictures came out catchy good , HD video's nice also ... the adapter looks like it can handle the unfathomable-er lens , but i would not put all my money on that ... i will still support the lens wile shooting . and given that i throw up about 13 $ on the lens at a thrift store , i think this adapter is really worth the outlay. Another detail , make sure you lock the lens all the way ... wait for the click.
Allows use with older FD lenses on Digital Cameras
Bodymount for Canon EOS, Canon FD
Description
Firmness Mount for Canon Auto Focus Style EOS Bodies, using Canon FD Series Lenses
Customer Reviews
A careful buy
I purchased this adapter because it was the only one sold on a significant photo equipment website, and had good reviews there. So far it works as advertised and was simple to unite.Aperture on my FD lens is easy to set, it changes the light amount live as you look through your viewfinder. After that you unprejudiced manually focus. No biggie.I don't plan on pulling out the glass for macro, as others have reviewed there is no augury of exactly where it's supposed to be set.For the price + some cheap used glass off ebay, this product was a seemly choice.I'm dropping a star because it didn't come with instructions, though attaching it is not hard at all to plate out.
Bower FD-EOS
Works discriminating. Easy to install & operate.Will add 1.25 magnification factor to your setupWill NOT allow you to have an infinity focal point.tests:[...]
February 10, 2011
| Helpful Votes: 2 | Rating: 3
not good it
I was hoping this would concede me to some of my old FD lenses in my rebel but to no avail. the quality is not there for what it is worth. should have bought a Lomo lens as an alternative.Its made very well but its jsut not worth the money and effort.
New Canon EOS Camera Society to Canon FD Lens adapter with correction lens inside
Made With Screw up one's courage to the sticking point And Mc Glass
Two glaze caps for adapter
Description
This manufacturer new adapter will allow you to use CANON FD mount lenses and macro accessories on Canon EOS cameras. The lens detachment scale can be used as well as the focusing to infinity .The adapter has correction lens inside.
Customer Reviews
Works well
This adapter works well. Toughened old FD Lenses (Canon and Tamron) on my Rebel XSi. Image quality is absolutely fine for most people. Does not arrive with instructions, but obviously only fits one way. Need to have plenty of light or external flash for nice results.If you already have a collection of FD Lenses then this is a good product.
January 9, 2009
(Ellicott City, MD) | Helpful Votes: 8 | Rating: 5
Works Talented
This adapter sic saved me 100s of dollars by allowing me to use all of the lenses from my Canon AE1 with my Rebel XTi. I was able to use it to connect both Canon and Albinar lenses.Shipping was nimble-witted as well and the item was well-packed.
June 2, 2008
| Helpful Votes: 6 | Rating: 5
Marvellous adapter
I bought this EOS to FD adapter to put older Canon FD lenses on my Canon EOS Nonconformist T2i (550 D).I've been using this adapter for two weeks and it works great. I didn't see any cheapness with the develop quality. The adapter fit nicely on the body and FD lenses fit nice and snug. Nothing felt like it was growing to fall apart. I was able to shoot great video with cheap FD lenses from ebay!
Allows the use of Canon lenses with an FD mount to be acclimated to on Canon EOS camera bodies. The lenses will meter o.k. but will only focus MANUALLY. There is a 1.3x magnification financier and requires a one stop increase in exposure. This version includes a correction glass, so it will target to infinity.
Customer Reviews
This is Primary for using the superior lenses of the past
Note the Photo above is NOT this artefact. This product is a adapter which contains a LENS and is superior to the one shown.The Canon FD/FL series of lenses for the spike mount cameras of the past were the standard of high quality optics, and the FL SC and SSC lenses were the foremost lenses on the market. When the lighter weight eos lenses replaced the bayonet system, many users were unnatural to retire these superior quality manual focus lenses.This adapter is far superior to the tastelessly machined glassless adapters available elsewhere, I own both. Not only does this adapter fit well on both the camera bodies ( I use XS and XSi) and the lenses, the source optical quality is maintained as well as infinity focus.By being a 1.3X teleconverter you gain new magnification, but this is of course unnoticeable when composing in the camera.Metering is uneffected, and the cheaper glassless one causes "enunciation" errors which...
May 19, 2009
(San Bernardino, Ca.) | Helpful Votes: 13 | Rating: 5
Loving terrible option
I'm using it to conterminous with a Canon Rebel Xti and an old Canon zoom lens. This is a great option for those who don't like letting old lenses go to unused. While I agree with the other reviewers that the combination can be a little cumbersome, it beats having to buy a new lens. Inordinate product!
Works as Advertised
I purchased this particular even after reading some of the negative reviews. Here's my take.Old lenses are a lot of fun and you can get some great lenses for a reasonable price. My macro lens set someone back me around $100 and it performs much, much better than that. The adapter is a simple metal ring that fits on your camera council lens mount. I happen to have a , but it shouldn't matter as long as the camera has an EF mount. You formulate up the red dots like you would on a lens and twist it to lock it into place. After that, you mount the lens (I have a Canon FD 50mm f/3.5 macro lens). It snapped instantly into place. In this configuration, I like to set the camera on AE mode so that I can manually adjust the aperture on the lens and concede the camera to meter and pick the shutter speed.The only problem (which...
February 10, 2010
(San Francisco, CA) | Helpful Votes: 5 | Rating: 4
Manufactured by RAINBOWIMAGING, with "Fotasy" logo
Give focus to infinity!
Extreme quality metal lens mount allows Canon FD Lens to be used on micro 4/3 camera society.
All Metal Pattern
Silken surface for effortless mount,fine made to be light weight and strong.
Description
Expensive quality metal lens mount allows Canon FD Lens to be used on micro 4/3 camera hull.
The adapter has no electrical connection and diaphragm & focusing are required to be set by manual.
In accord to:
Panasonic: G1, GH1, E-P1
Olympus: E-P1
Material:
Made of Copper & Aluminum
Customer Reviews
HOW-TO put Canon FD lens on Lumix GF1 camera
Trim, simple, inexpensive adapter!It arrived 3 days after I ordered, but without any instructions.Fairly straightforward to use, except for the dialect knoll that controls the position of the pin for aperture control,and one needs to know how to set the camera menu options so that it accepts the instructions lens.Here's how I set up a Canon 50 mm f1.2 FD lens on my Panasonic Lumix GF1 camera:1. Settle adapter ring onto camera: align the red dot on the adapter and red dot on the camera, twist to close.2. Settle lens on adapter:2a. Stop the lens down to its smallest aperture.2b. On the adapter, there is a ring that wheel the position of a pin that allows for aperture control. Facing the front of the camera, turn the ring to its most counterclockwise placement.2c. Seat the lens on the adapter (align the red dots). Now turn the adapter heraldry annulet to its most clockwise position. This aligns the pin with the lens pin.2d. Twist the lens...
Works enormous - make sure you follow Kiang's how to
I bought it for my new Panasonic GH2 camera and a Canon FD 70-210mm lens. I could not get it to labour at first basically the iris of the lens was wide open and not adjustable. After following Kiang's how-to (first situation), I was able to get it to work as expected. I set my camera focus to manual; turn on "Shoot without a lens" in the Specially menu; select A or M mode (per Kiang and have not tried other modes); adjust the desired chasm on the lens and shoot it away. I noticed the manual focus assistance on the GH2 (zoom in while adjusting bring into focus) does not work the same as the kit lens, but I was able to activate it using the jog dial whenever I need it. I thus found this by accident. Also noted is the F number is always blank in the photo's attribute. This is understandable since the camera has no way of getting this news from this manual lens.I came from a machinist background so can also tell that the quality and workmanship is magic on this adapter. I am...
May 29, 2011
(Mill Creek, WA United States) | Helpful Votes: 2 | Rating: 5
Sound construction - works well
Not much more to be said. Bought this for the Lumix GH1, you condign need to go into the user menu and activate the "Use camera without lens" feature so the Lumix stops striking you to check the lens. Also if you want to check critical focus click on the button that adjusts where the woolly center will be and it does the whole zoom in thing as though the kit lens was mounted.
Canon FD, New FD, FL Lens to Canon EOS Camera Adapter, for ...
If you have a SLR or DSLR camera and other maker/mount lenses, the Fotodiox Mount Adapters assign you to use your lenses on the pellicle/digital camera substance. Fotodiox offers a orbit of adapter from unfettered arrangement to smaller looks digital adapters. Adapting larger order lens, i. e. , obese looks – milieu composition, vehicle arrangement – 35mm, tiptop brim-to-side sharpness.
Buy Cheap Black friday Opteka Canon FD (Manual Focus) Lens to ...
The Opteka FD (Handbook Centre) System to Canon EOS (Sports car Woolly) Series Cameras Lens Adapter allows the use of older Canon FD series lenses on Canon’s EOS (sports car concentrate) series cameras. Opposite from other clean mount adapters, this is an optical adapter which is truly at the same tempo also a temporary teleconverter, which increases the convergent term by a component of 1. This adapter allows for focusing at infinity.
mass fd/ef adapter ring canon fd to canon ef eos adapter (black ...
* The adapter is aluminium house with impudence fittings, fully removable giving this unexcelled adapter the compliancy of Macro or iInfinity, within one adapter. * This mark new adapter will agree to you to use old rage Canon FD mount cold mount lenses and macro frills on Canon EOS cameras. * The adapter is expected to compel the dead AF turn found on the 1D and many coating cameras to permit concentrate testimony. Yield Niceties (including carton): manipulate:94 g immensity:7*7*4 cm Compact including: 1 x FD/EF Adapter Get someone on the blower 2 x Preservative Caps for Adapter Ding-dong……....
Buy Cheap Black friday Fotodiox Lens Mount Adapter, Canon FD, New ...
If you have a SLR or DSLR camera and other maker/mount lenses, the Fotodiox Mount Adapters acknowledge you to use your lenses on the photograph/digital camera cadaver. Fotodiox offers a file of adapter from good aspect to smaller set-up digital adapters. Adapting larger plan lens, i. e. , capacious plan – centre appearance, centre appearance – 35mm, super with one's heart in one's mouth-to-periphery sharpness.
I purchased an old form Canon FD 55mm 1:1.8 lense but soon realised that it will not fit on my new Canon 550d (yes, I am new to this). Is there an adaptor I can buy online that will allow this lense to fit? Even If I don't have any electronic aim in the
Yes, FD to EF adapters are impartially easy to find. You should be able to find one on eBay or Amazon for a reasonable price.
However, if you are not comfortable with operating your camera in directions mode and selecting the aperture
| Aug 29, 2011
Canon 50mm EF or Canon 50mm FD with adaptor? Please help?
May 20, 4951 by littlegmoon | Posted in Photography
Hi,
I am disquieting to buy a 50mm lens for my Canon EOS 450d, I have seen the EF f/1.8 for £99 but have also seen the FD f/1.8 for £8 on ebay.
I be versed the FD is a different fit, but I have found an adaptor for £21,
The EF 50mm is attractive much a must have lens for the EOS, its just so versatile, cheap and fast (for the price). I think you can find an EF50/1.8 for less than £99 if you look hardened enough.
FD catch- I finally made the switch to digital with a Canon EOS Digital Rebel.
... post-order photo retailers by searching for an "FD to EOS adapter. ...
For standard, a Nikon lens can fit onto a Canon EOS body with an adapter 2.5 mm
... Theone possession you can't do is put older Canon FD lenses on an EOS body, ...
The halt is over. In the early hours of this day Canon released firmware update 2.0.3 for Canon EOS 5D Insigne II, which enables recording at 25 fps, as it was until now the only Canon camera that didnt have this option. Included in this update is also a purpose for manually adjusting the sound recording level, a histogram air for shooting movies in manual exposure and changes the audio sampling...
Removable Glasss Constituent for Macro...
If you have a SLR or DSLR camera and other maker/mount lenses, the Fotodiox Mount Adapters brook you to use your lenses on the film/digital camera body. Sharing lenses has some distinct advantages. Particular prime lens just can't be replaced, and you save cost of purchase...
