ARCA-SWISS monoball Z Stronger, lighter A chairwoman of tripod head design for over 40 years, ARCA-SWISS is setting new standards revisiting their B-series models and introducing the Z-Series, fitting as elegant, and even more perfect. The size and weight of the ball heads... read more
ARCA-SWISS monoball Z Stronger, lighter A superior of tripod head design for over 40 years, ARCA-SWISS is setting new standards revisiting their B-series models and introducing the Z-Series, reasonable as elegant, and even more perfect. The size and weight of the ball heads... read more
Can be straight away mounted to adapt the tripod as required
Sets new standards revisiting their B-series models
Description
ARCA-SWISS Monoball Z1 DP Copy Pan with Quick Set Device "Flip-Lock", Supports 122 lbs. Arca Swiss: 801114 ARCA-SWISS monoball Z Stronger, lighter A chairwoman of tripod head design for over 40 years, ARCA-SWISS is setting new standards revisiting their B-series models and introducing the Z-Series, by a hair's breadth as elegant, and even more perfect. The size and weight of the ball heads have been significantly reduced. The tablet and fastening are now assembled using a patented bayonet mount. Various accessories can thus be speedily mounted to adapt the tripod as required. In addition to the proven, patented Arca-Swiss features, including aspherical tablet heads, axial clamping and PMF (progressive motion related friction control), the Z-Series also boasts new polytechnic developments and optimized materials and coatings.
Customer Reviews
The one to outdo!
This is an owing product. Solid, attractive construction. Simple to use, with little to no chance of moving the regress adjustment at the wrong time. Easy to set up, easy to tighten just where you want it, a healthy piece of equipment. I use this on a set of Manfrotto 055XWNB legs, for a reasonably affordable mounting system. If I were to dissipate more money, I'd go for better legs. I would leave the head as-is regardless of what legs I purchased. The only caveat on the big cheese is the quick-release system. I have both Really Right Stuff and standard Arca-Swiss plates. The RRS plates are fractionally wider than the A-S class, and as a result I need to do a bit of adjustment screw spinning when moving between some of my pieces of equipment if I hope for to do the "slide in from the end" mounting technique. Not an issue if I'm fully opening the clamp to do a drop-in mount. This isn't a big dole out, but I may have purchased the screw-clamp model (for +/- $10 less)...
November 15, 2008
(Mansfield, MA USA) | Helpful Votes: 8 | Rating: 5
Apart from ballhead, highly recommended
This ballhead is a joy to use. I've had it while shooting as a hobbyist, and then later as a thorough. The typical shoot involves setting the resistance based on the weight of the camera and lens. It's express to do based on feel, takes less than 10 seconds on average to get it perfect. After the resistance is set I can reframe as needed without needing to set alight the knobs. It's an eye opener the first time you use a high quality ballhead. Something I really liked about the main protrusion is that the resistance scale is free floating, meaning you can set how much resistance '10' represents on the proportion. It's handy to have if your camera is extra light or extra heavy. A 10 for my camera can exemplify the same resistance to movement as a 10 for yours, once the scale is adjusted. On a ballhead without this adjustment, if you have a heavy camera you can go old times the highest number on the scale trying to get the resistance just right, and then the numbers only look...
August 3, 2009
(SAN FRANCISCO, US, Canada) | Helpful Votes: 4 | Rating: 5
Enormous product - totally worth it.
I have had the Arca Swiss Z1 SP for over 3 years now. It has served me well and has never let me down in all this interval. I used it during several international trips across the world and when coupled with my Gitzos (Series 3 and 5 from their systematic parade) has delivered critically sharp images, without fail. It is true that the manufacturer of Arca Swiss mat is pretty reclusive and don't have even a viable website, but I simply cannot find fault with the product and have never needed any well-intentioned of service on it.
The monoball Z DP with its shift panning mechanism below the camera mount keeps the camera perfectly vertical to the swinging smooth
In summation to the proven, patented Arca-Swiss features, including aspherical ball heads, axial clamping and PMF
Description
ARCA-SWISS monoball Z Stronger, lighter A chairwoman of tripod head design for over 40 years, ARCA-SWISS is setting new standards revisiting their B-series models and introducing the Z-Series, fitting as elegant, and even more perfect. The size and weight of the ball heads have been significantly reduced. The bit and fastening are now assembled using a patented bayonet mount. Various accessories can thus be straight away mounted to adapt the tripod as required. In addition to the proven, patented Arca-Swiss features, including aspherical tablet heads, axial clamping and PMF (progressive motion related friction control), the Z-Series also boasts new mechanical developments and optimized materials and coatings. The new series can withstand an incredible 60 kg (122 lbs) off-hinge. Z-Series heads are available as Version Z SP (single pan) and Version Z DP (double pan). The monoball Z DP with its second panning agency below the camera mount keeps the camera perfectly vertical to the swinging plane, for improve panoramic stitching of multiple images.
Customer Reviews
Diligent, smooth ballhead
I bought the Arca-Swiss Z1 ballhead to use in conjunction with the Wimberley Sidekick gimbal. The Sidekick puts a side burden on the ballhead it's used with, loading the weight of the camera, Sidekick and a super-telephoto lens on the ballhead with the governor flipped over 90-degrees. The Sidekick has vertical panning bearings, but no horizontal panning aim, so it relies on the panning function of the ballhead to provide horizontal gimbal action. Hence, the ballhead must be deep-felt and have a smooth horizontal panning functions. The Z1 is excellent for this use, offering very high load power and a smooth panning function separate from the ballhead. When the Sidekick is mounted there's no play in any regular. I also use the Z1 for scenic photography and macro. One important need was for me to switch from a body with a super-tele lens to another substance with a wide angle lens in just a few seconds. That's easy to do with the Arca-Swiss/Sidekick combination. I objective slip off the...
Everything I wanted in a tripod top a intercept
I was chiefly a " hand held" photographer until I injured my arm last year. I've had to switch to being a tripod user and it hasn't been an casually transition. I got my tripod, but couldn't make up my mind about a head. I researched and asked questions of my photographer friends for a combine months before buying this tripod head. I went back and forth between the top brands - Kirk, In reality Right stuff and this one. I'm not a rich person by any means and to me, this was a big purchase, so I wanted to get it right the first term so I wouldn't be wishing I had gotten a different head a year from now. Currently I use a Canon Eos Challenge XTi. (and a Canon Elan film camera) The heaviest lenses I have are my 100mm macro and my 28 - 135mm so undeniably most any head would do, BUT, if things go as planned, I want to upgrade to a Canon 5D next year, and hope to add a 400mm lens to my bag, so I wanted a entirely that would handle that as well as what I have now. This one should do that without a...
ARCA-SWISS monoball Z Stronger, lighter A superior of tripod head design for over 40 years, ARCA-SWISS is setting new standards revisiting their B-series models and introducing the Z-Series, reasonable as elegant, and even more perfect. The size and weight of the ball heads have been significantly reduced. The capsule and fastening are now assembled using a patented bayonet mount. Various accessories can thus be apace mounted to adapt the tripod as required. In addition to the proven, patented Arca-Swiss features, including aspherical bit heads, axial clamping and PMF (progressive motion related friction control), the Z-Series also boasts new detailed developments and optimized materials and coatings. The new series can withstand an incredible 60 kg (122 lbs) off-pin. Z-Series heads are available as Version Z SP (single pan) and Version Z DP (double pan). The monoball Z DP with its second panning logical positivism below the camera mount keeps the camera perfectly vertical to the swinging plane, for excellent panoramic stitching of multiple images.
Customer Reviews
Sweet it!
I've had two heads in the good old days. The first was the basic head that came on a cheap tripod that I got when I was a teenager and was really meant to be cast-off with a video camera. The next time around (about 15 years ago) I purchased a Bogen 3021 tripod and what I soup would be a very flexible (how can you go wrong with a name like that). The tripod was great and the head was incredibly tractable for setting up for a shot and taking the picture. However, it was not great for shooting anything moving, because It wasn't mild to track things with the design of the head and it tended to move a bit or settle while tightening it in position. Years afterwards I started reading about tripod heads and specifically shot heads. After taking a year to decide I bought this one, which I've now owned...
The greatest head in the world
Absolutely irreplaceable item for anybody with large (and heavy) telephoto lenses. Once set it does not move, gist...stays solid. Excellent product
July 1, 2011
| Helpful Votes: 1 | Rating: 5
Arca-Swiss Monoball Z1 | Points in Focus Photography
Arca-Swiss is perhaps trounce known for the for the dovetail animated rescue system they developed, which has since become the de facto benchmark for tainted-end true to life testy announcement systems throughout the work. Without a proof tripod managing director, there’s particle trait to using a tripod at all, above all the more costly carbon string ones. Brace a wobbly low-end bean with an up-market carbon wool tripod, and you may as well have saved your bucks on the tripod....
A curtailed intro to ballheads . . Ballheads are one of the worst and most in favour types of tripod heads to hand. As the name implies, a ballhead consists of a shot with a neck that allows miscellaneous camera/lens mounting options to be fixed devoted to to it. . This tablet lives in a socket within a bright metal covering with animosity rudder. The primary strife curb, the pre-eminent locking protuberance, is ordinarily the largest protuberance with smaller wheel adjusting capsule strain and panning selfish attrition (if so equipped)....
Big QfttX 13 1 B. B1 with 1 « or IB £220. Plates from £28. .... 12170' C/W 8i20*
» SLIDES £2300 5l4* - £575 ARCA SWISS Smashingly made monorails from 6iS ...
... ARCA-SWISS introduces 2 NEW MONOBALLS: B1 and B2 For more than 20 years, the
renowned Monoball from ARCA-SWISS has been unsurpassed in terms of quality ...
The monoball Z DP with its shift panning...
ARCA-SWISS monoball Z Stronger, lighter A chairwoman of tripod head design for over 40 years, ARCA-SWISS is setting new standards revisiting their B-series models and introducing the Z-Series, fitting as elegant, and even more perfect. The size and weight of the ball heads...
